How Much Does Flooring Installation Cost in Vancouver?
Generic cost ranges don't tell you why one flooring project costs $4,500 and another costs $6,500. See two real, itemized Vancouver projects and see how a scoped estimate changes everything.
Why a single number can't answer this question
A vague range like "$3 to $15 per square foot" doesn't tell you anything about your specific flooring project. RenoFiz builds a scoped, itemized estimate for every project, so instead of a guess, you get two real Vancouver projects — one small, one larger — with every line item shown.
Below are two real RenoFiz estimates for Vancouver flooring projects: a small condo living room LVP replacement, and a larger detached house kitchen and dining area tile installation. They show two very different project types — and how RenoFiz builds a custom, itemized estimate around your actual scope, not a generic range.
$4,458
How much does it cost to install LVP flooring in a condo living room in Vancouver?
RenoFiz estimated $4,458 CAD for a 144 sqft condo living room LVP flooring installation (range $3,500–$5,400). Includes carpet and vinyl removal, acoustic underlayment, LVP materials and installation, baseboard salvage and reinstallation, and condo logistics.
View full estimate$6,542
How much does it cost to install tile flooring in a kitchen and dining area in Vancouver?
RenoFiz estimated $6,542 CAD for a 180 sqft kitchen and dining area tile flooring installation (range $5,200–$7,900). Includes hardwood removal, uncoupling membrane, contractor-supplied porcelain tile, appliance disconnect/reconnect, and new white baseboards.
View full estimateTwo project types — yours will be different.
| Comparison | Smaller project: Condo LVP living room | Larger project: Kitchen/dining porcelain tile |
|---|---|---|
| Property type | Condo / Apartment | Detached house |
| Flooring scope | 144 sqft living room LVP installation in a condo | 180 sqft kitchen/dining tile installation |
| Existing flooring | Carpet + sheet vinyl | Narrow-plank hardwood |
| New flooring | Luxury Vinyl Plank (LVP) | Porcelain tile |
| Total project cost | $4,458.28 | $6,542.00 |
What Vancouver Homeowners Should Know
- Condo noise bylaws & acoustic underlayment
Most Vancouver condos and apartments require acoustic-rated underlayment that meets IIC sound-rating requirements. Budget for material upgrades and strata approval paperwork — even for small flooring replacements.
- Asbestos testing for pre-1990 buildings
Buildings constructed before 1990 in BC may trigger mandatory hazardous material testing before disturbing flooring, adhesives, or leveling compounds. Homes built in 1990 or later typically do not.
- Radiant heating compatibility
If your Vancouver home has in-floor radiant heating, tile is an excellent conductor but requires specific thin-set and installation methods. LVP must be rated for radiant applications to avoid warping or gapping.
- Appliance coordination for kitchen flooring
Kitchen flooring projects often involve disconnecting and moving appliances. Budget for a plumber to disconnect and reconnect the dishwasher, and factor in that new flooring goes under freestanding appliances.
- Subfloor condition is the biggest wildcard
The most common cost variable in Vancouver flooring projects is what's found under the old floor. Water damage, rot, or uneven subfloors can add $400–$850 for leveling compound or subfloor repairs once the old material is removed.
Ready to get your project moving?
Our AI assistant helps you understand the work and likely cost. If you decide to connect with a contractor, they start with your project details and estimate.