Level 2 EV Charger Installation
Select your home and installation details to get an instant EV charger installation estimate, then book the job with a local contractor.
Vancity Electric
★ 4.9
574 reviews
Published installation price range
$450–$16,675 depending on scope
$450 is for connection to a confirmed EV-ready rough-in; $16,675 is the supported upper end when the selected scope includes a charger, permit, trenching, drilling, and a service upgrade
Configure your installation
What's included in your EV charger installation
Your installation is completed by a licensed and insured Vancity Electric electrician, with the electrical permit included when selected.
Hardwired or plug-in
Choose a hardwired Level 2 charger for a permanent connection, or a 240V/NEMA 14-50 plug-in setup when you want a removable charger and a compatible outlet.
Chargers and homes we support
We install Tesla Wall Connector, ChargePoint Home Flex, Grizzl-E, FLO, Wallbox, JuiceBox, a charger you already own in detached houses, townhouses, condo/strata homes.
Service areas
Vancouver, Burnaby, Richmond, Surrey, North Vancouver, West Vancouver, Coquitlam, New Westminster, Delta, Langley, Maple Ridge, Abbotsford.
Frequently Asked
How much does EV charger installation cost in Vancouver?
A confirmed EV-ready rough-in connection is $450. Standard installations include $250 labour, a $100 40A two-pole breaker, and cable at $34 per foot using 5, 10, 20, or 30 ft choices. A charger is $1,000 and an electrical permit is $400 when included. Exterior routing adds $200, concrete or masonry drilling adds $125, and underground trenching and wiring is $1,500–$5,000. Confirmed EV-ready connections do not include standard cable, routing, drilling, breaker, or panel-capacity charges.
Do I need strata approval for EV charging in my Vancouver condo?
Yes — BC's Strata Property Act gives owners the right to install EV charging, but strata approval is still required. The strata may specify approved installers, equipment, and cost-sharing arrangements for common-area infrastructure.
Do I need a permit for EV charger installation in Vancouver?
Yes — EV charger installation generally requires an electrical permit and inspection. Confirm the applicable process with your local municipality and Technical Safety BC; for Vancouver addresses, the City of Vancouver administers many electrical permits. The work must be done by a licensed electrician.
Do you install Tesla Wall Connectors?
Yes. A Tesla Wall Connector is a hardwired Level 2 charger, so standard installation pricing applies.
How much does it cost to install a Tesla Wall Connector?
Standard hardwired installation labour is $250, plus a $100 breaker and the selected cable length at $34 per foot. A confirmed EV-ready rough-in connection is $450 instead of those standard-install components. Charger supply, permit, routing, drilling, and applicable panel work are added based on the selected scope.
How much does a 240V / NEMA 14-50 outlet cost?
Standard NEMA 14-50 and hardwired installation labour are both $250. The standard path also includes a $100 breaker and cable at $34 per foot using the selected 5, 10, 20, or 30 ft length.
Do I need a panel upgrade for an EV charger?
The calculator evaluates panel capacity only for standard or uncertain rough-in paths. Depending on the home, the estimate may include a $1,500 EV load-management device, a $1,000 subpanel, or a $6,000–$9,800 service upgrade. Capacity questions and charges do not apply when an EV-ready rough-in is confirmed.
Can I install a Level 3 (DC fast) charger at home?
Level 3 charging is not practical for residential use. Level 2 is the standard for homes, and RenoFiz does not offer Level 3 installation.
Want a custom estimate for your project?
Describe the work and get a custom estimate of the likely scope and cost in minutes. A local professional confirms the final details before work begins.